|
 |
CLOSE OUT SPECIALS!
ONCE THEY ARE GONE, THEY'RE GONE!
SO GIVE US A CALL AT 1.888.266.5969 |
GTO6427
4" x 6" 2-Way Loudspeaker
SPECIFICATIONS:
Power Handling, RMS: 40 Watts
Power Handling, Peak: 120 Watts
Frequency Response: (±3dB) 75Hz - 20kHz
Sensitivity: 91dB
Mounting Depth: 1-13/16" (47mm)
Cut-Out Diameter: 5-3/4" x 3-5/16" (88mm x 148mm)
Impedance: 2 Ohms
Quantity Left: 3
Your Price: $69.00 (pair)
Please call us at 1.888.266.5969 for info/order. |
|
4"
x 6" 2-Way Plate loudspeaker with Plus One woofer cone, My-Ti
tweeter and Low-Q design.
• Plus One (patent pending) woofer cones
- The GTO6427 has a cone with more surface area than competing models
of the same size. The benefits of Plus One are greater efficiency
and bass output.
• My-Ti (Mylar/titanium composite) tweeters.
Stiff and light, extremely efficient, JBL's new My-Ti tweeters deliver
the high-frequency extension of titanium domes with the damping
of composite diaphragms.
• 2-ohm impedance extracts all the power from amplifies that
are designed to increase their power when driving two ohms. Get
allof the amplifier power possible with GTO.
|
|
GTO527
5-1/4" 2-Way Loudspeaker
SPECIFICATIONS:
Power Handling, RMS: 45 Watts
Power Handling, Peak: 135 Watts
Frequency Response: (±3dB) 70Hz - 21kHz
Sensitivity: 91dB
Mounting Depth: 2-5/16" (59mm)
Cut-Out Diameter: 4-11/16" (120mm)
Impedance: 2 Ohms
Quantity Left: 2
Your Price: $79.00 (pair)
Please call us at 1.888.266.5969 for info/order. |
|
5-1/4"
2-way loudspeaker with Plus One woofer cone, My-Ti tweeter, tweeter
level control and Low-Q design.
• Plus One (patent pending) woofer cones
- The GTO527 has a cone with more surface area than competing models
of the same size. The benefits of Plus One are greater efficiency
and bass output.
• My-Ti (Mylar/titanium composite) tweeters. Stiff and light,
extremely efficient, JBL's new My-Ti tweeters deliver the high-frequency
extension of titanium domes with the damping of composite diaphragms.
These are not commonly used w-domes, but full edge-driven domes
like those found in higher quality home audio speakers. The benefits
are increased power handling, reduced distortion, and increased
efficiency. This technology also allows for better integration with
the mid/woofer.
• 2-ohm impedance extracts all the power from amplifies that
are designed to increase their power when driving two ohms. Get
allof the amplifier power possible with GTO.
• Unipoint allows the tweeter to rotate 350 degrees, enabling
you to direct the tweeter for optimum imaging. The GTO 527 also
includes a tweeter level control allowing easy adjustment of tweeter
output even after installation.
|
|
GTO75.4 II
520-Watt 2-Channel Power Amplifier
SPECIFICATIONS:
Power Output: 104 watts RMS x 4 channel at 4 ohms
and = 1% THD + N 284 watts RMS x 2 channel
at 4 ohms,
14.4V supply and =1% THD + N
Signal-to-Noise Ratio: 80 dBA (reference 1 watt
into 4 ohms)
Dynamic Power: 80 dBA (reference 1 watt into 4
ohms)
Effective Damping Factor: 6.384 at 4 ohms
Frequency Response: (-3dB) 10Hz - 83kHz
Maximum Input Signal: 5.8V
Maximum Sensitivity: 230 mV
Output Regulation: .069 dB at 4 ohms
Dimensions (H x W x D): 2-3/8" x 15-1/8"
x 12-5/16"
Quantity Left: 4
Your Price: $225.00 (each)
Please call us at 1.888.266.5969 for info/order. |
|
•
The GTO75.4 II's high-output MOSFET power supply ensures optimum
power delivery into numerous impedances with low distortion.
• The 75.4 II comes outfitted with two variable 12dB per octave
electronic crossovers allowing you to optimize system tuning based
on speaker location and accompanying loudspeaker components.
• Full range preamp outputs are provided facilitating multiple
amplifier hookups without the need for high-loss Y-adapters or signal
splitters. |
|
GTO1201.1 II
1,200-Watt Subwoofer Amplifier
SPECIFICATIONS:
Power Output: 787 watts RMS x 1 channel at 4 ohms
and = 1% THD + N 1114 watts RMS x 1 channel at
2 ohms,
14.4V supply and = 1% THD + N
Signal-to-Noise Ratio: 70dBa (reference 1 watt
into 4 ohms)
Dynamic Power: 1339 watts at 2 ohms
Effective Damping Factor: 6.348 at 4 ohms
Frequency Response: (-3dB) 10Hz - 302Hz
Maximum Input Signal: 6.1V
Maximum Sensitivity: 140mV
Output Regulation: .14dB at 4 ohms
Dimensions (H x W x D): 18-11/16" x 12-5/16"
x 2-3/8"
Quantity Left: 2
Your Price: $350.00 (each)
Please call us at 1.888.266.5969 for info/order.
|
|
•
The GTO1201.1 II features a high-frequency Class D switching power
supply. This topology is more efficient that traditional Class AB
designs, drawing far less current from your vehicle charging system.
• The GTO1201.1 II features a 12dB per
octave electronic crossover, allowing you to optimize bass performance
based on cabin size, as well as subwoofer location and enclosure
type.
• RCA low-level inputs.
• Full-range preamp outputs facilitate use
of multiple amplifiers without the need for noisy and expensive
adapters or signal splitters.
• A variable bass boost circuit is provided
to optimize system response.
• Optional remote level bass control available.
|
|
 |
|